Journal Description
Gels
Gels
is an international, peer-reviewed, open access journal on physical and chemical gels published monthly online by MDPI.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- High visibility: indexed within Scopus, SCIE (Web of Science), PubMed, PMC, CAPlus / SciFinder, and other databases.
- Journal Rank: JCR - Q1 (Polymer Science)
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 11.1 days after submission; acceptance to publication is undertaken in 2.7 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: reviewers who provide timely, thorough peer-review reports receive vouchers entitling them to a discount on the APC of their next publication in any MDPI journal, in appreciation of the work done.
- Testimonials: See what our editors and authors say about the Gels.
Impact Factor:
4.6 (2022);
5-Year Impact Factor:
5.2 (2022)
Latest Articles
Agriculture 4.0: Polymer Hydrogels as Delivery Agents of Active Ingredients
Gels 2024, 10(6), 368; https://doi.org/10.3390/gels10060368 (registering DOI) - 26 May 2024
Abstract
The evolution from conventional to modern agricultural practices, characterized by Agriculture 4.0 principles such as the application of innovative materials, smart water, and nutrition management, addresses the present-day challenges of food supply. In this context, polymer hydrogels have become a promising material for
[...] Read more.
The evolution from conventional to modern agricultural practices, characterized by Agriculture 4.0 principles such as the application of innovative materials, smart water, and nutrition management, addresses the present-day challenges of food supply. In this context, polymer hydrogels have become a promising material for enhancing agricultural productivity due to their ability to retain and then release water, which can help alleviate the need for frequent irrigation in dryland environments. Furthermore, the controlled release of fertilizers by the hydrogels decreases chemical overdosing risks and the environmental impact associated with the use of agrochemicals. The potential of polymer hydrogels in sustainable agriculture and farming and their impact on soil quality is revealed by their ability to deliver nutritional and protective active ingredients. Thus, the impact of hydrogels on plant growth, development, and yield was discussed. The question of which hydrogels are more suitable for agriculture—natural or synthetic—is debatable, as both have their merits and drawbacks. An analysis of polymer hydrogel life cycles in terms of their initial material has shown the advantage of bio-based hydrogels, such as cellulose, lignin, starch, alginate, chitosan, and their derivatives and hybrids, aligning with sustainable practices and reducing dependence on non-renewable resources.
Full article
(This article belongs to the Special Issue Hydrogels, Oleogels and Bigels Used for Drug Delivery)
►
Show Figures
Open AccessArticle
Rheology of Suspensions of TEMPO-Oxidised and Cationic Cellulose Nanofibrils—The Effect of Chemical Pre-Treatment
by
Luís Alves, Solange Magalhães, Jorge F. S. Pedrosa, Paulo J. T. Ferreira, José A. F. Gamelas and Maria Graça Rasteiro
Gels 2024, 10(6), 367; https://doi.org/10.3390/gels10060367 (registering DOI) - 26 May 2024
Abstract
Cellulose nanofibrils (CNFs) are particles with a high aspect ratio. Typically, chemically pre-treated CNFs (containing anionic or cationic charged groups) consist of long fibrils (up to 2 μm) with very low thickness (less than 10 nm). Derived from their high aspect ratio, CNFs
[...] Read more.
Cellulose nanofibrils (CNFs) are particles with a high aspect ratio. Typically, chemically pre-treated CNFs (containing anionic or cationic charged groups) consist of long fibrils (up to 2 μm) with very low thickness (less than 10 nm). Derived from their high aspect ratio, CNFs form strong hydrogels with high elasticity at low concentrations. Thus, CNF suspensions appear as an interesting rheology modifier to be applied in cosmetics, paints, foods, and as a mineral suspending agent, among other applications. The high viscosity results from the strong 3D fibril network, which is related to the good fibrillation of the material, allowing the nanofibrils to overlap. The overlap concentration (c*) was found to vary from ca. 0.13 to ca. 0.60 wt.% depending on the type and intensity of the pre-treatment applied during the preparation of the CNFs. The results confirm the higher tendency for the fibres treated with (3-chloro-2-hydroxypropyl) trimethylammonium chloride (CHPTAC) and 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO) to form a 3D network, resulting in the lowest c*. For the TEMPO-oxidised CNF suspensions, it was also found that aggregation is improved at acidic pH conditions due to lower charge repulsion among fibrils, leading to an increase in the suspension viscosity as well as higher apparent yield stresses. TEMPO CNF suspensions with a low content of carboxylic groups tend to precipitate at moderately acidic pH values.
Full article
(This article belongs to the Special Issue Hydrogel-Based Novel Biomaterials: Achievements and Prospects)
►▼
Show Figures
Figure 1
Open AccessArticle
Formation of Stable Vascular Networks by 3D Coaxial Printing and Schiff-Based Reaction
by
Jingxin Shan, Zhiyuan Kong and Xiaohong Wang
Gels 2024, 10(6), 366; https://doi.org/10.3390/gels10060366 (registering DOI) - 25 May 2024
Abstract
Vascularized organs hold potential for various applications, such as organ transplantation, drug screening, and pathological model establishment. Nevertheless, the in vitro construction of such organs encounters many challenges, including the incorporation of intricate vascular networks, the regulation of blood vessel connectivity, and the
[...] Read more.
Vascularized organs hold potential for various applications, such as organ transplantation, drug screening, and pathological model establishment. Nevertheless, the in vitro construction of such organs encounters many challenges, including the incorporation of intricate vascular networks, the regulation of blood vessel connectivity, and the degree of endothelialization within the inner cavities. Natural polymeric hydrogels, such as gelatin and alginate, have been widely used in three-dimensional (3D) bioprinting since 2005. However, a significant disparity exists between the mechanical properties of the hydrogel materials and those of human soft tissues, necessitating the enhancement of their mechanical properties through modifications or crosslinking. In this study, we aim to enhance the structural stability of gelatin–alginate hydrogels by crosslinking gelatin molecules with oxidized pullulan (i.e., a polysaccharide) and alginate molecules with calcium chloride (CaCl2). A continuous small-diameter vascular network with an average outer diameter of 1 mm and an endothelialized inner surface is constructed by printing the cell-laden hydrogels as bioinks using a coaxial 3D bioprinter. The findings demonstrate that the single oxidized pullulan crosslinked gelatin and oxidized pullulan/CaCl2 double-crosslinked gelatin–alginate hydrogels both exhibit a superior structural stability compared to their origins and CaCl2 solely crosslinked gelatin–alginate hydrogels. Moreover, the innovative gelatin and gelatin–alginate hydrogels, which have excellent biocompatibilities and very low prices compared with other hydrogels, can be used directly for tissue/organ construction, tissue/organ repairment, and cell/drug transportation.
Full article
(This article belongs to the Special Issue Advances in Biomedical Hydrogels (2nd Edition))
Open AccessReview
Exploring Applications and Preparation Techniques for Cellulose Hydrogels: A Comprehensive Review
by
Yanjin Tang, Zhenxing Fang and Hoo-Jeong Lee
Gels 2024, 10(6), 365; https://doi.org/10.3390/gels10060365 (registering DOI) - 25 May 2024
Abstract
Cellulose hydrogels, formed either through physical or chemical cross-linking into a three-dimensional network from cellulose or its derivatives, are renowned for their exceptional water absorption capacities and biocompatibility. Rising demands for sustainable materials have spurred interest in cellulose hydrogels, attributed to their abundant
[...] Read more.
Cellulose hydrogels, formed either through physical or chemical cross-linking into a three-dimensional network from cellulose or its derivatives, are renowned for their exceptional water absorption capacities and biocompatibility. Rising demands for sustainable materials have spurred interest in cellulose hydrogels, attributed to their abundant supply, biodegradability, and non-toxic nature. These properties highlight their extensive potential across various sectors including biomedicine, the food industry, and environmental protection. Cellulose hydrogels are particularly advantageous in applications such as drug delivery, wound dressing, and water treatment. Recent large-scale studies have advanced our understanding of cellulose preparation and its applications. This review delves into the fundamental concepts, preparation techniques, and current applications of cellulose hydrogels in diverse fields. It also discusses the latest advances in nano-lignin-based hydrogels, providing a comprehensive overview of this promising material and offering insights and guidance for future research and development.
Full article
(This article belongs to the Special Issue Cellulose- and Nanocellulose-Based Gels: Design and Applications)
Open AccessArticle
PVA Hydrogels Supplemented with PLA Mesh for Tissue Regeneration Scaffold
by
Young-Ho Seo, Jae-Man Lee, Sun-Young Park, Myung-Hoo Kim, Seon-Beom Kim and Tae-Hwan Oh
Gels 2024, 10(6), 364; https://doi.org/10.3390/gels10060364 (registering DOI) - 25 May 2024
Abstract
This study examined the tensile strength and biocompatibility properties of polyvinyl alcohol (PVA) hydrogel tissue regeneration scaffolds with polylactic acid (PLA) mesh fabric added as reinforcement, with a focus on the impact of heat treatment temperature and the number of layers of the
[...] Read more.
This study examined the tensile strength and biocompatibility properties of polyvinyl alcohol (PVA) hydrogel tissue regeneration scaffolds with polylactic acid (PLA) mesh fabric added as reinforcement, with a focus on the impact of heat treatment temperature and the number of layers of the PLA mesh fabric. The hydrogel scaffolds were prepared using a freeze–thaw method to create PVA hydrogel, with the PLA mesh fabric placed inside the hydrogel. The swelling ratio of the PVA/PLA hydrogel scaffolds decreased with increasing layer number and heat treatment temperature of the PLA mesh. The gel strength was highest when five layers of PLA mesh fabric were added, heat-treated at 120 °C, and confirmed to be properly placed inside the hydrogel by SEM images. The MTT assay and DAPI staining using HaCaT cells demonstrated that the cell proliferation was uninterrupted throughout the experimental period, confirming the biocompatibility of the scaffold. Therefore, we confirmed the possibility of using PLA mesh fabric as a reinforcement for PVA hydrogel to improve the strength of scaffolds for tissue regeneration, and we confirmed the potential of PLA mesh fabric as a reinforcement for various biomaterials.
Full article
(This article belongs to the Special Issue Advances in Hydrogels for Biomedical Applications)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Antibacterial Silver Nanoparticle Containing Polydopamine Hydrogels That Enhance Re-Epithelization
by
Naphtali A. O’Connor, Abdulhaq Syed, Ertan Kastrat and Hai-Ping Cheng
Gels 2024, 10(6), 363; https://doi.org/10.3390/gels10060363 - 24 May 2024
Abstract
A polydopamine polyelectrolyte hydrogel was developed by ionic crosslinking dextran sulfate with a copolymer of polyethyleneimine and polydopamine. Gelation was promoted by the slow hydrolysis of glucono-δ-lactone. Within this hydrogel, silver nanoparticles were generated in situ, ranging from 25 nm to 200 nm
[...] Read more.
A polydopamine polyelectrolyte hydrogel was developed by ionic crosslinking dextran sulfate with a copolymer of polyethyleneimine and polydopamine. Gelation was promoted by the slow hydrolysis of glucono-δ-lactone. Within this hydrogel, silver nanoparticles were generated in situ, ranging from 25 nm to 200 nm in size. The antibacterial activity of the hydrogel was proportional to the quantity of silver nanoparticles produced, increasing as the nanoparticle count rose. The hydrogels demonstrated broad-spectrum antibacterial efficacy at concentrations up to 108 cells/mL for P. aeruginosa, K. pneumoniae, E. coli and S. aureus, the four most prevalent bacterial pathogens in chronic septic wounds. In ex vivo studies on human skin, biocompatibility was enhanced by the presence of polydopamine. Dextran sulfate is a known irritant, but formulations with polydopamine showed improved cell viability and reduced levels of the inflammatory biomarkers IL-8 and IL-1α. Silver nanoparticles can inhibit cell migration, but an ex vivo human skin study showed significant re-epithelialization in wounds treated with hydrogels containing silver nanoparticles.
Full article
(This article belongs to the Special Issue Biopolymer-Based Gels for Drug Delivery and Tissue Engineering)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Nanocomposite Gels Loaded with Flurbiprofen: Characterization and Skin Permeability Assessment in Different Skin Species
by
Sheimah El Bejjaji, Gladys Ramos-Yacasi, Joaquim Suñer-Carbó, Mireia Mallandrich, Lara Goršek, Chandler Quilchez and Ana Cristina Calpena
Gels 2024, 10(6), 362; https://doi.org/10.3390/gels10060362 - 24 May 2024
Abstract
Nanocomposite gels consist of nanoparticles dispersed in a gel matrix. The main aim of this work was to develop nanocomposite gels for topical delivery of Flurbiprofen (FB) for humans and farm animals. Nanocomposite gels were prepared stemming from nanoparticles (NPs) freeze-dried with two
[...] Read more.
Nanocomposite gels consist of nanoparticles dispersed in a gel matrix. The main aim of this work was to develop nanocomposite gels for topical delivery of Flurbiprofen (FB) for humans and farm animals. Nanocomposite gels were prepared stemming from nanoparticles (NPs) freeze-dried with two different cryoprotectants, D-(+)-trehalose (NPs-TRE) and polyethylene glycol 3350 (NPs-PEG), sterilized by gamma (γ) irradiation, and gelled with Sepigel® 305. Nanocomposite gels with FB-NPs-TRE and FB-NPs-PEG were physiochemically characterized in terms of appearance, pH, morphological studies, porosity, swelling, degradation, extensibility, and rheological behavior. The drug release profile and kinetics were assessed, as well as, the ex vivo permeation of FB was assessed in human, porcine and bovine skin. In vivo studies in healthy human volunteers were tested without FB to assess the tolerance of the gels with nanoparticles. Physicochemical studies demonstrated the suitability of the gel formulations. The ex vivo skin permeation capacity of FB-NPs nanocomposite gels with different cryoprotectants allowed us to conclude that these formulations are suitable topical delivery systems for human and veterinary medicine. However, there were statistically significant differences in the permeation of each formulation depending on the skin. Results suggested that FB-NPs-PEG nanocomposite gel was most suitable for human and porcine skin, and the FB-NPs-TRE nanocomposite gel was most suitable for bovine skin.
Full article
(This article belongs to the Special Issue Gel-Based Materials for Biomedical Engineering)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Dual Functionalization of Hyaluronan Dermal Fillers with Vitamin B3: Efficient Combination of Bio-Stimulation Properties with Hydrogel System Resilience Enhancement
by
Alexandre Porcello, Michèle Chemali, Cíntia Marques, Corinne Scaletta, Kelly Lourenço, Philippe Abdel-Sayed, Wassim Raffoul, Nathalie Hirt-Burri, Lee Ann Applegate and Alexis Laurent
Gels 2024, 10(6), 361; https://doi.org/10.3390/gels10060361 - 24 May 2024
Abstract
Hyaluronic acid (HA) hydrogels are commonly used for facial dermal filling and for alternative medical aesthetic purposes. High diversity exists in commercial formulations, notably for the optimization of finished product stability, functionality, and performance. Polyvalent ingredients such as calcium hydroxylapatite (CaHA) or vitamin
[...] Read more.
Hyaluronic acid (HA) hydrogels are commonly used for facial dermal filling and for alternative medical aesthetic purposes. High diversity exists in commercial formulations, notably for the optimization of finished product stability, functionality, and performance. Polyvalent ingredients such as calcium hydroxylapatite (CaHA) or vitamin B3 (niacinamide) are notably used as bio-stimulants to improve skin quality attributes at the administration site. The aim of the present study was to perform multi-parametric characterization of two novel cross-linked dermal filler formulas (HAR-1 “Instant Refine” and HAR-3 “Maxi Lift”) for elucidation of the various functional impacts of vitamin B3 incorporation. Therefore, the HAR products were firstly comparatively characterized in terms of in vitro rheology, cohesivity, injectability, and resistance to chemical or enzymatic degradation (exposition to H2O2, AAPH, hyaluronidases, or xanthine oxidase). Then, the HAR products were assessed for cytocompatibility and in vitro bio-stimulation attributes in a primary dermal fibroblast model. The results showed enhanced resilience of the cohesive HAR hydrogels as compared to JUVÉDERM® VOLBELLA® and VOLUMA® reference products in a controlled degradation assay panel. Furthermore, significant induction of total collagen synthesis in primary dermal fibroblast cultures was recorded for HAR-1 and HAR-3, denoting intrinsic bio-stimulatory effects comparable or superior to those of the Radiesse® and Sculptra™ reference products. Original results of high translational relevance were generated herein using robust and orthogonal experimental methodologies (hydrogel degradation, functional benchmarking) and study designs. Overall, the reported results confirmed the dual functionalization role of vitamin B3 in cross-linked HA dermal fillers, with a significant enhancement of hydrogel system stability attributes and the deployment of potent bio-stimulatory capacities.
Full article
(This article belongs to the Special Issue Latest Advances and Prospects of Hydrogels for Biomedical Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
Preparation and Testing of Polyethylenimine-Impregnated Silica Gel for CO2 Capture
by
Veronika Kyselová, Jakub Havlín and Karel Ciahotný
Gels 2024, 10(6), 360; https://doi.org/10.3390/gels10060360 - 23 May 2024
Abstract
This work studied the low-temperature sorption of carbon dioxide on impregnated silica gel. An impregnating agent was used polyethyleneimine. The content of the impregnating agent in the silica gel matrix was 33.4 wt.%. Material properties such as the Brunauer–Emmett–Teller (BET) surface area, pore
[...] Read more.
This work studied the low-temperature sorption of carbon dioxide on impregnated silica gel. An impregnating agent was used polyethyleneimine. The content of the impregnating agent in the silica gel matrix was 33.4 wt.%. Material properties such as the Brunauer–Emmett–Teller (BET) surface area, pore distribution, total pore volume, and thermal stability of the impregnated material were determined for the sample. During the measurement of the adsorption–desorption cycles, the loss of the impregnating agent in the material matrix was also determined. Due to the decrease in the content of polyethyleneimine, the sorption capacity of the adsorbent for CO2 also decreased. It was found that after the 20th adsorption–desorption cycle, the content of the impregnating agent in the adsorbent dropped by 3.15 wt.%, and, as a result, the adsorption capacity for CO2 dropped to almost half.
Full article
(This article belongs to the Special Issue Functionalized Gels for Environmental Applications (2nd Edition))
►▼
Show Figures
Figure 1
Open AccessArticle
Efficacy of Chitosan-Carboxylic Acid Hydrogels in Reducing and Chelating Iron for the Removal of Rust from Stone Surface
by
Francesco Gabriele, Cinzia Casieri and Nicoletta Spreti
Gels 2024, 10(6), 359; https://doi.org/10.3390/gels10060359 - 22 May 2024
Abstract
In the field of stone conservation, the removal of iron stains is one of the most challenging issues due to the stability and low solubility of the ferrous species. In the present paper, three different chitosan-based hydrogels added with acetic, oxalic or citric
[...] Read more.
In the field of stone conservation, the removal of iron stains is one of the most challenging issues due to the stability and low solubility of the ferrous species. In the present paper, three different chitosan-based hydrogels added with acetic, oxalic or citric acids are applied on different lithotypes, i.e., granite, travertine and marble, widely diffused in monumental heritages, and artificially stained by deposition of a rust dispersion. The reducing power of carboxylic acids is combined with the good chelating properties of chitosan to effectively remove rust from stone surfaces. As evidenced by colorimetry on three samples of each lithotype and confirmed by 1H-NMR relaxometry and SEM/EDS analyses, the chitosan-oxalic acid hydrogel shows the best performance and a single application of 24 h is enough to get a good restoration of the stone original features. Lastly, the chitosan-oxalic acid hydrogel performs well when a rusted iron grid is placed directly on the lithic surfaces to simulate a more realistic pollution. Current work in progress is devoted to finding better formulations for marble, which is the most challenging to clean or, with a different approach, to developing protective agents to prevent rust deposition.
Full article
(This article belongs to the Special Issue Gels for Removal and Adsorption (2nd Edition))
►▼
Show Figures
Graphical abstract
Open AccessArticle
TiO2–Alginate–Chitosan-Based Composites for Skin Tissue Engineering Applications
by
Emma Bobu, Kata Saszet, Zsejke-Réka Tóth, Emőke Páll, Tamás Gyulavári, Lucian Baia, Klara Magyari and Monica Baia
Gels 2024, 10(6), 358; https://doi.org/10.3390/gels10060358 - 22 May 2024
Abstract
The UV-B component of sunlight damages the DNA in skin cells, which can lead to skin cancer and premature aging. Therefore, it is necessary to use creams that also contain UV-active substances. Many sunscreens contain titanium dioxide due to its capacity to absorb
[...] Read more.
The UV-B component of sunlight damages the DNA in skin cells, which can lead to skin cancer and premature aging. Therefore, it is necessary to use creams that also contain UV-active substances. Many sunscreens contain titanium dioxide due to its capacity to absorb UV-B wavelengths. In the present study, titan dioxide was introduced in alginate and chitosan–alginate hydrogel composites that are often involved as scaffold compositions in tissue engineering applications. Alginate and chitosan were chosen due to their important role in skin regeneration and skin protection. The composites were cross-linked with calcium ions and investigated using FT-IR, Raman, and UV–Vis spectroscopy. The stability of the obtained samples under solar irradiation for skin protection and regeneration was analyzed. Then, the hydrogel composites were assayed in vitro by immersing them in simulated body fluid and exposing them to solar simulator radiation for 10 min. The samples were found to be stable under solar light, and a thin apatite layer covered the surface of the sample with the two biopolymers and titanium dioxide. The in vitro cell viability assay suggested that the anatase phase in alginate and chitosan–alginate hydrogel composites have a positive impact.
Full article
(This article belongs to the Special Issue Advances in Chitin- and Chitosan-Based Hydrogels)
Open AccessArticle
Effect of Gold Nanoparticle Size on Regulated Catalytic Activity of Temperature-Responsive Polymer−Gold Nanoparticle Hybrid Microgels
by
Palida Pongsanon, Akifumi Kawamura, Hideya Kawasaki and Takashi Miyata
Gels 2024, 10(6), 357; https://doi.org/10.3390/gels10060357 - 22 May 2024
Abstract
Gold nanoparticles (AuNPs) possess attractive electronic, optical, and catalytic properties, enabling many potential applications. Poly(N-isopropyl acrylamide) (PNIPAAm) is a temperature-responsive polymer that changes its hydrophilicity upon a slight temperature change, and combining PNIPAAm with AuNPs allows us to modulate the properties
[...] Read more.
Gold nanoparticles (AuNPs) possess attractive electronic, optical, and catalytic properties, enabling many potential applications. Poly(N-isopropyl acrylamide) (PNIPAAm) is a temperature-responsive polymer that changes its hydrophilicity upon a slight temperature change, and combining PNIPAAm with AuNPs allows us to modulate the properties of AuNPs by temperature. In a previous study, we proposed a simpler method for designing PNIPAAm–AuNP hybrid microgels, which used an AuNP monomer with polymerizable groups. The size of AuNPs is the most important factor influencing their catalytic performance, and numerous studies have emphasized the importance of controlling the size of AuNPs by adjusting their stabilizer concentration. This paper focuses on the effect of AuNP size on the catalytic activity of PNIPAAm–AuNP hybrid microgels prepared via the copolymerization of N-isopropyl acrylamide and AuNP monomers with different AuNP sizes. To quantitatively evaluate the catalytic activity of the hybrid microgels, we monitored the reduction of 4-nitrophenol to 4-aminophenol using the hybrid microgels with various AuNP sizes. While the hybrid microgels with an AuNP size of 13.0 nm exhibited the highest reaction rate and the apparent reaction rate constant (kapp) of 24.2 × 10−3 s−1, those of 35.9 nm exhibited a small kapp of 1.3 × 10−3 s−1. Thus, the catalytic activity of the PNIPAAm–AuNP hybrid microgel was strongly influenced by the AuNP size. The hybrid microgels with various AuNP sizes enabled the reversibly temperature-responsive on–off regulation of the reduction reaction.
Full article
(This article belongs to the Special Issue Recent Advances in Smart Gels)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Composite Hydrogel with Oleic Acid-Grafted Mesoporous Silica Nanoparticles for Enhanced Topical Delivery of Doxorubicin
by
Marta Slavkova, Diana Dimitrova, Christina Voycheva, Teodora Popova, Ivanka Spassova, Daniela Kovacheva, Yordan Yordanov, Virginia Tzankova and Borislav Tzankov
Gels 2024, 10(6), 356; https://doi.org/10.3390/gels10060356 - 22 May 2024
Abstract
Mesoporous silica nanoparticles (MSNs) are inorganic nanocarriers presenting versatile properties and the possibility to deliver drug molecules via different routes of application. Their modification with lipids could diminish the burst release profile for water-soluble molecules. In the case of oleic acid (OA) as
[...] Read more.
Mesoporous silica nanoparticles (MSNs) are inorganic nanocarriers presenting versatile properties and the possibility to deliver drug molecules via different routes of application. Their modification with lipids could diminish the burst release profile for water-soluble molecules. In the case of oleic acid (OA) as a lipid component, an improvement in skin penetration can be expected. Therefore, in the present study, aminopropyl-functionalized MSNs were modified with oleic acid through carbodiimide chemistry and were subsequently incorporated into a semisolid hydrogel for dermal delivery. Doxorubicin served as a model drug. The FT-IR and XRD analysis as well as the ninhydrin reaction showed the successful preparation of the proposed nanocarrier with a uniform particle size (352–449 nm) and negative zeta potential. Transmission electron microscopy was applied to evaluate any possible changes in morphology. High encapsulation efficiency (97.6 ± 1.8%) was achieved together with a sustained release profile over 48 h. The composite hydrogels containing the OA-modified nanoparticles were characterized by excellent physiochemical properties (pH of 6.9; occlusion factor of 53.9; spreadability of factor 2.87 and viscosity of 1486 Pa·s) for dermal application. The in vitro permeation study showed 2.35 fold improvement compared with the hydrogel containing free drug. In vitro cell studies showed that loading in OA-modified nanoparticles significantly improved doxorubicin’s cytotoxic effects toward epidermoid carcinoma cells (A431). All of the results suggest that the prepared composite hydrogel has potential for dermal delivery of doxorubicin in the treatment of skin cancer.
Full article
(This article belongs to the Special Issue Recent Advances in Hydrogels for Biomedical Application)
►▼
Show Figures
Graphical abstract
Open AccessArticle
Formation of Microcapsules of Pullulan by Emulsion Template Mechanism: Evaluation as Vitamin C Delivery Systems
by
Esther Santamaría, Naroa Lizarreta, Susana Vílchez, Carme González and Alicia Maestro
Gels 2024, 10(6), 355; https://doi.org/10.3390/gels10060355 - 21 May 2024
Abstract
Pullulan is a polysaccharide that has attracted the attention of scientists in recent times as a former of edible films. On the other hand, its use for the preparation of hydrogels needs more study, as well as the formation of pullulan microcapsules as
[...] Read more.
Pullulan is a polysaccharide that has attracted the attention of scientists in recent times as a former of edible films. On the other hand, its use for the preparation of hydrogels needs more study, as well as the formation of pullulan microcapsules as active ingredient release systems for the food industry. Due to the slow gelation kinetics of pullulan with sodium trimetaphosphate (STMP), capsules cannot be formed through the conventional method of dropping into a solution of the gelling agent, as with other polysaccharides, since the pullulan chains migrate to the medium before the capsules can form by gelation. Pullulan microcapsules have been obtained by using inverse water-in-oil emulsions as templates. The emulsion that acts as a template has been characterized by monitoring its stability and by optical microscopy, and the size of the emulsion droplets has been correlated with the size of the microcapsules obtained, demonstrating that it is a good technique for their production. Although some flocs of droplets form, these remain dispersed during the gelation process and two capsule size distributions are obtained: those of the non-flocculated droplets and the flocculated droplets. The microcapsules have been evaluated as vitamin C release systems, showing zero-order release kinetics for acidic pH and Fickian mechanism for neutral pH. On the other hand, the microcapsules offer good protection of vitamin C against oxidation during an evaluation period of 14 days.
Full article
(This article belongs to the Special Issue Food Hydrogels: Synthesis, Characterization and Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
The Role of WO3 Nanoparticles on the Properties of Gelatin Films
by
Katia Rubini, Arianna Menichetti, Maria Cristina Cassani, Marco Montalti, Adriana Bigi and Elisa Boanini
Gels 2024, 10(6), 354; https://doi.org/10.3390/gels10060354 - 21 May 2024
Abstract
Gelatin films are very versatile materials whose properties can be tuned through functionalization with different systems. This work investigates the influence of WO3 nanoparticles on the swelling, barrier, mechanical, and photochromic properties of gelatin films. To this purpose, polyvinylpirrolidone (PVP)-stabilized WO3
[...] Read more.
Gelatin films are very versatile materials whose properties can be tuned through functionalization with different systems. This work investigates the influence of WO3 nanoparticles on the swelling, barrier, mechanical, and photochromic properties of gelatin films. To this purpose, polyvinylpirrolidone (PVP)-stabilized WO3 nanoparticles were loaded on gelatin films at two different pH values, namely, 4 and 7. The values of swelling and solubility of functionalized films displayed a reduction of around 50% in comparison to those of pristine, unloaded films. In agreement, WO3 nanoparticles provoked a significant decrease in water vapor permeability, whereas the decrease in the values of elastic modulus (from about 2.0 to 0.7 MPa) and stress at break (from about 2.5 to 1.4 MPa) can be ascribed to the discontinuity created by the nanoparticles inside the films. The results of differential scanning calorimetry and X-ray diffraction analysis suggest that interaction of PVP with gelatin reduce gelatin renaturation. No significant differences were found between the samples prepared at pH 4 and 7, whereas crosslinking with glutaraldehyde greatly influenced the properties of gelatin films. Moreover, the incorporation of WO3 nanoparticles in gelatin films, especially in the absence of glutaraldehyde, conferred excellent photochromic properties, inducing the appearance of an intense blue color after a few seconds of light irradiation and providing good resistance to several irradiation cycles.
Full article
(This article belongs to the Special Issue Physical and Mechanical Properties of Polymer Gels (2nd Edition))
►▼
Show Figures
Graphical abstract
Open AccessArticle
Microencapsulation of Grape Pomace Extracts with Alginate-Based Coatings by Freeze-Drying: Release Kinetics and In Vitro Bioaccessibility Assessment of Phenolic Compounds
by
Josipa Martinović, Rita Ambrus, Mirela Planinić, Gordana Šelo, Ana-Marija Klarić, Gabriela Perković and Ana Bucić-Kojić
Gels 2024, 10(6), 353; https://doi.org/10.3390/gels10060353 - 21 May 2024
Abstract
The phenols from grape pomace have remarkable beneficial effects on health prevention due to their biological activity, but these are often limited by their bioaccessibility in the gastrointestinal tract. Encapsulation could protect the phenolics during digestion and influence the controlled release in such
[...] Read more.
The phenols from grape pomace have remarkable beneficial effects on health prevention due to their biological activity, but these are often limited by their bioaccessibility in the gastrointestinal tract. Encapsulation could protect the phenolics during digestion and influence the controlled release in such an intestine where their potential absorption occurs. The influence of freeze-drying encapsulation with sodium alginate (SA) and its combination with gum Arabic (SA-GA) and gelatin (SA-GEL) on the encapsulation efficiency (EE) of phenol-rich grape pomace extract and the bioaccessibility index (BI) of phenolics during simulated digestion in vitro was investigated. The addition of a second coating to SA improved the EE, and the highest EE was obtained with SA-GEL (97.02–98.30%). The release of phenolics followed Fick’s law of diffusion and the Korsmeyer–Peppas model best fitted the experimental data. The highest BI was found for the total phenolics (66.2–123.2%) and individual phenolics (epicatechin gallate 958.9%, gallocatechin gallate 987.3%) using the SA-GEL coating were used. This study shows that freeze-dried encapsulated extracts have the potential to be used for the preparation of various formulations containing natural phenolic compounds with the aim of increasing their bioaccessibility compared to formulations containing non-encapsulated extracts.
Full article
(This article belongs to the Special Issue Recent Advance in Food Gels (2nd Edition))
►▼
Show Figures
Graphical abstract
Open AccessArticle
Enhancing Effector Jurkat Cell Activity and Increasing Cytotoxicity against A549 Cells Using Nivolumab as an Anti-PD-1 Agent Loaded on Gelatin Nanoparticles
by
Dalia S. Ali, Heba A. Gad and Rania M. Hathout
Gels 2024, 10(6), 352; https://doi.org/10.3390/gels10060352 - 21 May 2024
Abstract
The current research investigated the use of gelatin nanoparticles (GNPs) for enhancing the cytotoxic effects of nivolumab, an immune checkpoint inhibitor. The unique feature of GNPs is their biocompatibility and functionalization potential, improving the delivery and the efficacy of immunotherapeutic drugs with fewer
[...] Read more.
The current research investigated the use of gelatin nanoparticles (GNPs) for enhancing the cytotoxic effects of nivolumab, an immune checkpoint inhibitor. The unique feature of GNPs is their biocompatibility and functionalization potential, improving the delivery and the efficacy of immunotherapeutic drugs with fewer side effects compared to traditional treatments. This exploration of GNPs represents an innovative direction in the advancement of nanomedicine in oncology. Nivolumab-loaded GNPs were prepared and characterized. The optimum formulation had a particle size of 191.9 ± 0.67 nm, a polydispersity index of 0.027 ± 0.02, and drug entrapment of 54.67 ± 3.51%. A co-culture experiment involving A549 target cells and effector Jurkat cells treated with free nivolumab solution, and nivolumab-loaded GNPs, demonstrated that the latter had significant improvements in inhibition rate by scoring 87.88 ± 2.47% for drug-loaded GNPs against 60.53 ± 3.96% for the free nivolumab solution. The nivolumab-loaded GNPs had a lower IC50 value, of 0.41 ± 0.01 µM, compared to free nivolumab solution (1.22 ± 0.37 µM) at 72 h. The results indicate that administering nivolumab-loaded GNPs augmented the cytotoxicity against A549 cells by enhancing effector Jurkat cell activity compared to nivolumab solution treatment.
Full article
(This article belongs to the Special Issue Design and Optimization of Pharmaceutical Gels (2nd Edition))
►▼
Show Figures
Figure 1
Open AccessArticle
Evaluation of the Biological Activity of Manna Exudate, from Fraxinus ornus L., and Its Potential Use as Hydrogel Formulation in Dermatology and Cosmetology
by
Carla Villa, Francesco Saverio Robustelli della Cuna, Elena Grignani, Sara Perteghella, Davide Panzeri, Debora Caviglia and Eleonora Russo
Gels 2024, 10(6), 351; https://doi.org/10.3390/gels10060351 - 21 May 2024
Abstract
Manna, a well-known herbal drug has multiple traditional and pharmaceutical uses and the entire composition, sugar derivatives and polyphenols, gives rise to a very interesting bioactive complex with versatile therapeutic and benefic properties such as antioxidant and anti-inflammatory activities. The aim of this
[...] Read more.
Manna, a well-known herbal drug has multiple traditional and pharmaceutical uses and the entire composition, sugar derivatives and polyphenols, gives rise to a very interesting bioactive complex with versatile therapeutic and benefic properties such as antioxidant and anti-inflammatory activities. The aim of this research was to investigate a F. ornus manna extract loaded in a pectin hydrogel as a synergic vehicle to evaluate the potential use of the complex for cosmetic and dermatological applications. In particular, the study set out to disclose manna properties as a wound healing agent with antimicrobial and reparative activity on infected tissues. Moreover, considering the correlation between antioxidant activity and antiaging potential, the extract was investigated in regard to the anti-elastase activity and skin whitening potential. The total phenolic content of each extract was also determined and a safe profile by in vitro cytotoxicity studies was verified. The hydrogel complex, containing the manna extract and pectin as the gelling agent, exhibited suitable properties in terms of pH (from 5.50 to 6.80), rheological behavior and ability of preserving the antioxidant activity of the manna exudate (around 10%). All the peculiarities that make the pectin hydrogels ideal systems for skin disease, as wound dressings and for antiaging cosmetic formulations.
Full article
(This article belongs to the Section Gel Analysis and Characterization)
►▼
Show Figures
Figure 1
Open AccessArticle
Effect of Shearing and Annealing on the Pasting Properties of Different Starches
by
Abdellatif A. Mohamed, Mohamed Saleh Alamri, Hesham Al-Quh, Shahzad Hussain, Mohamed A. Ibraheem, Abdur Rehman and Akram A. Qasem
Gels 2024, 10(6), 350; https://doi.org/10.3390/gels10060350 - 21 May 2024
Abstract
The functional characteristics of starch can be altered by shear force, which makes the impact on its microstructure of great importance to the food industry. This study investigated the effects of freeze-drying on the gel texture, pasting capabilities, and swelling power of starches
[...] Read more.
The functional characteristics of starch can be altered by shear force, which makes the impact on its microstructure of great importance to the food industry. This study investigated the effects of freeze-drying on the gel texture, pasting capabilities, and swelling power of starches made from sweet potatoes (SP), chickpeas (CP), and wheat (WS) combined with Cordia (CG) and Ziziphus gum (ZG). The samples were annealed in water without shearing and in a rapid visco-analyzer (RVA) for 30 min at 60 °C while being spun at 690 rpm. Both native and freeze-dried samples were mixed with 1% or 3% ZG and CG. After annealing, the starches were examined using a texture analyzer and RVA. The results showed that freeze-drying had a substantial (p > 0.05) impact on the starch granule, in addition to the effect of annealing. The peak viscosity of freeze-dried native CP and SP starches increased, but the peak viscosity of freeze-dried wheat starch decreased. The setbacks for CP and WS increased, whereas the setbacks for SP varied slightly. Furthermore, it was demonstrated that annealing in an RVA exhibited a substantially lower peak viscosity than annealing in a water bath; the RVA’s shearing effect may have been the cause of this difference. Cordia gum fared better than ZG in terms of peak viscosity, although ZG significantly reduced setback in comparison to CG. Among the various blends, the native WB sample had the lowest hardness (100 ± 4.9 g), while the freeze-dried WB SP sample had the greatest (175.5 ± 4.8 g). Shearing of starches broke up the granules into smaller pieces, which made them gel at lower temperatures. This could be a good thing when they are needed for food uses that require little cooking.
Full article
(This article belongs to the Special Issue Recent Advance in Food Gels (2nd Edition))
►▼
Show Figures
Figure 1
Open AccessArticle
Bigel Matrix Loaded with Probiotic Bacteria and Prebiotic Dietary Fibers from Berry Pomace Suitable for the Development of Probiotic Butter Spread Product
by
Laura Tamašauskaitė, Vidmantė Minelgaitė, Aušra Šipailienė, Rimantė Vinauskienė, Viktorija Eisinaitė and Daiva Leskauskaitė
Gels 2024, 10(5), 349; https://doi.org/10.3390/gels10050349 - 20 May 2024
Abstract
This study presents a novel approach to developing a probiotic butter spread product. We evaluated the prebiotic activity of soluble dietary fibers extracted from cranberry and sea buckthorn berry pomace with different probiotic strains (Limosilactobacillus reuteri, Lacticaseibacillus paracasei, and Lactiplantibacillus
[...] Read more.
This study presents a novel approach to developing a probiotic butter spread product. We evaluated the prebiotic activity of soluble dietary fibers extracted from cranberry and sea buckthorn berry pomace with different probiotic strains (Limosilactobacillus reuteri, Lacticaseibacillus paracasei, and Lactiplantibacillus plantarum), uploaded selected compatible combination in the bigel matrix, and applied it in the probiotic butter spread formulation. Bigels and products were characterized by physical stability, rheological, textural properties, and viability of probiotics during storage at different conditions. The highest prebiotic activity score was observed in soluble cranberry (1.214 ± 0.029) and sea buckthorn (1.035 ± 0.009) fibers when cultivated with L. reuteri. The bigels loaded with probiotics and prebiotic fiber exhibited a significant increase in viscosity (higher consistency coefficient 40–45 Pa·sn) and better probiotic viability (>6 log CFU/g) during long-term storage at +4 °C temperature, surpassing the bigels loaded with probiotics alone. Bigels stored at a lower temperature (−18 °C) maintained high bacterial viability (above 8.5 log CFU/g). The butter spread enriched with the bigel matrix was softer (7.6–14.2 N), indicating improved spreadability. The butter spread product consistently met the required 6 log CFU/g for a functional probiotic food product until 60 days of storage at +4 °C temperature. The butter stored at −18 °C remained probiotic throughout the entire storage period, confirming the protective effect of the bigel matrix. The study’s results showed the potential of the bigel to co-encapsulate, protect, and deliver probiotics during prolonged storage under different conditions.
Full article
(This article belongs to the Special Issue Recent Advances in Food Gels)
►▼
Show Figures
Graphical abstract
Journal Menu
► ▼ Journal Menu-
- Gels Home
- Aims & Scope
- Editorial Board
- Reviewer Board
- Topical Advisory Panel
- Instructions for Authors
- Special Issues
- Topics
- Sections & Collections
- Article Processing Charge
- Indexing & Archiving
- Editor’s Choice Articles
- Most Cited & Viewed
- Journal Statistics
- Journal History
- Journal Awards
- Conferences
- Editorial Office
Journal Browser
► ▼ Journal BrowserHighly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Conferences
Special Issues
Special Issue in
Gels
Physically Cross-Linked Gels and Their Applications
Guest Editors: Regina R. Vildanova, Sergey V. Kolesov, Vitaliy V. KhutoryanskiyDeadline: 30 May 2024
Special Issue in
Gels
Dynamics of Polymeric Gels
Guest Editors: Shensheng Chen, Domenico LarobinaDeadline: 20 June 2024
Special Issue in
Gels
Flocculation and Electrokinetics in Bioresources and Environment: Related to Gels
Guest Editors: Kazuyoshi Ogawa, Yasuhisa Adachi, Hiroyuki OhshimaDeadline: 30 June 2024
Special Issue in
Gels
Gel Role in the World of the Cosmetic Research
Guest Editors: Carla Villa, Eleonora RussoDeadline: 20 July 2024
Topical Collections
Topical Collection in
Gels
Recent Advances and Future Perspectives in Stimuli-Responsive Gels
Collection Editors: Dirk Kuckling, Sandra Van Vlierberghe
Topical Collection in
Gels
Recent Advances and Future Perspectives in Organogels and Organogelators Research
Collection Editor: Jean-Michel Guenet
Topical Collection in
Gels
Hydrogel in Tissue Engineering and Regenerative Medicine
Collection Editor: Esmaiel Jabbari