Density functional theory (DFT) simulations of the oxygen evolution reaction (OER) are considered essential for understanding the limitations of water splitting. Most DFT calculations of the OER use an acidic reaction mechanism and the standard hydrogen electrode (SHE) as reference electrode. However, experimental studies are usually carried out under alkaline conditions using the reversible hydrogen electrode (RHE) as reference electrode. The difference between the conditions in experiment and calculations is then usually taken into account by applying a pH-dependent correction factor to the latter. As, however, the OER reaction mechanisms under acidic and under alkaline conditions are quite different, it is not clear a priori whether a simple correction factor can account for this difference. We derive in this paper step by step the theory to simulate the OER based on the alkaline reaction mechanism and explain the OER process with this mechanism and the RHE as reference electrode. We compare the mechanisms for alkaline and acidic OER catalysis and highlight the roles of the RHE and the SHE. Our detailed analysis validates current OER simulations in the literature and explains the differences in OER calculations with acidic and alkaline mechanisms.
Purpose-led Publishing is a coalition of three not-for-profit publishers in the field of physical sciences: AIP Publishing, the American Physical Society and IOP Publishing.
Together, as publishers that will always put purpose above profit, we have defined a set of industry standards that underpin high-quality, ethical scholarly communications.
We are proudly declaring that science is our only shareholder.
ISSN: 2515-7655
An interdisciplinary and fully open access journal that aims to set the agenda in identifying and publishing the most exciting and significant developments across all areas of energy-related research. JPhys Energy adopts open science principles to maximise the exchange of knowledge between existing and emerging communities.
Open all abstracts, in this tab
Qiuhua Liang et al 2021 J. Phys. Energy 3 026001
M Rosa Palacin et al 2024 J. Phys. Energy 6 031501
Battery technologies based in multivalent charge carriers with ideally two or three electrons transferred per ion exchanged between the electrodes have large promises in raw performance numbers, most often expressed as high energy density, and are also ideally based on raw materials that are widely abundant and less expensive. Yet, these are still globally in their infancy, with some concepts (e.g. Mg metal) being more technologically mature. The challenges to address are derived on one side from the highly polarizing nature of multivalent ions when compared to single valent concepts such as Li+ or Na+ present in Li-ion or Na-ion batteries, and on the other, from the difficulties in achieving efficient metal plating/stripping (which remains the holy grail for lithium). Nonetheless, research performed to date has given some fruits and a clearer view of the challenges ahead. These include technological topics (production of thin and ductile metal foil anodes) but also chemical aspects (electrolytes with high conductivity enabling efficient plating/stripping) or high-capacity cathodes with suitable kinetics (better inorganic hosts for intercalation of such highly polarizable multivalent ions). This roadmap provides an extensive review by experts in the different technologies, which exhibit similarities but also striking differences, of the current state of the art in 2023 and the research directions and strategies currently underway to develop multivalent batteries. The aim is to provide an opinion with respect to the current challenges, potential bottlenecks, and also emerging opportunities for their practical deployment.
Nuria Tapia-Ruiz et al 2021 J. Phys. Energy 3 031503
Increasing concerns regarding the sustainability of lithium sources, due to their limited availability and consequent expected price increase, have raised awareness of the importance of developing alternative energy-storage candidates that can sustain the ever-growing energy demand. Furthermore, limitations on the availability of the transition metals used in the manufacturing of cathode materials, together with questionable mining practices, are driving development towards more sustainable elements. Given the uniformly high abundance and cost-effectiveness of sodium, as well as its very suitable redox potential (close to that of lithium), sodium-ion battery technology offers tremendous potential to be a counterpart to lithium-ion batteries (LIBs) in different application scenarios, such as stationary energy storage and low-cost vehicles. This potential is reflected by the major investments that are being made by industry in a wide variety of markets and in diverse material combinations. Despite the associated advantages of being a drop-in replacement for LIBs, there are remarkable differences in the physicochemical properties between sodium and lithium that give rise to different behaviours, for example, different coordination preferences in compounds, desolvation energies, or solubility of the solid–electrolyte interphase inorganic salt components. This demands a more detailed study of the underlying physical and chemical processes occurring in sodium-ion batteries and allows great scope for groundbreaking advances in the field, from lab-scale to scale-up. This roadmap provides an extensive review by experts in academia and industry of the current state of the art in 2021 and the different research directions and strategies currently underway to improve the performance of sodium-ion batteries. The aim is to provide an opinion with respect to the current challenges and opportunities, from the fundamental properties to the practical applications of this technology.
Dulce M Morales and Marcel Risch 2021 J. Phys. Energy 3 034013
Discovery of electrocatalytic materials for high-performance energy conversion and storage applications relies on the adequate characterization of their intrinsic activity, which is currently hindered by the dearth of a protocol for consistent and precise determination of double layer capacitance (CDL). Herein, we propose a seven-step method that aims to determine CDL reliably by scan rate-dependent cyclic voltammetry considering aspects that strongly influence the outcome of the analysis, including (a) selection of a suitable measuring window, (b) the uncompensated resistance, (c) optimization of measuring settings, (d) data acquisition, (e) selection of data suitable for analysis, (f) extraction of the desired information, and (g) validation of the results. To illustrate the proposed method, two systems were studied: a resistor–capacitor electric circuit, and a glassy carbon disk in an electrochemical cell. With these studies, it is demonstrated that when any of the mentioned steps of the procedure are neglected, substantial deviations of the results are observed with misestimations as large as 61% in the case of the investigated electrochemical system. Moreover, we propose allometric regression as a more suitable model than linear regression for the determination of CDL for both the ideal and the non-ideal systems investigated. We stress the importance of assessing the accuracy of not only highly specialized electrochemical methods, but also of those that are well-known and commonly used as it is the case of the voltammetric methods. The procedure proposed herein is not limited to the determination of CDL, but can be effectively applied to any other analysis that aims to deliver quantitative results via voltammetric methods, which is crucial for the study of kinetic and diffusion phenomena in electrochemical systems.
Gavin D J Harper et al 2023 J. Phys. Energy 5 021501
The market dynamics, and their impact on a future circular economy for lithium-ion batteries (LIB), are presented in this roadmap, with safety as an integral consideration throughout the life cycle. At the point of end-of-life (EOL), there is a range of potential options—remanufacturing, reuse and recycling. Diagnostics play a significant role in evaluating the state-of-health and condition of batteries, and improvements to diagnostic techniques are evaluated. At present, manual disassembly dominates EOL disposal, however, given the volumes of future batteries that are to be anticipated, automated approaches to the dismantling of EOL battery packs will be key. The first stage in recycling after the removal of the cells is the initial cell-breaking or opening step. Approaches to this are reviewed, contrasting shredding and cell disassembly as two alternative approaches. Design for recycling is one approach that could assist in easier disassembly of cells, and new approaches to cell design that could enable the circular economy of LIBs are reviewed. After disassembly, subsequent separation of the black mass is performed before further concentration of components. There are a plethora of alternative approaches for recovering materials; this roadmap sets out the future directions for a range of approaches including pyrometallurgy, hydrometallurgy, short-loop, direct, and the biological recovery of LIB materials. Furthermore, anode, lithium, electrolyte, binder and plastics recovery are considered in order to maximise the proportion of materials recovered, minimise waste and point the way towards zero-waste recycling. The life-cycle implications of a circular economy are discussed considering the overall system of LIB recycling, and also directly investigating the different recycling methods. The legal and regulatory perspectives are also considered. Finally, with a view to the future, approaches for next-generation battery chemistries and recycling are evaluated, identifying gaps for research. This review takes the form of a series of short reviews, with each section written independently by a diverse international authorship of experts on the topic. Collectively, these reviews form a comprehensive picture of the current state of the art in LIB recycling, and how these technologies are expected to develop in the future.
Ifan E L Stephens et al 2022 J. Phys. Energy 4 042003
Electrochemical CO2 reduction (CO2R) is an attractive option for storing renewable electricity and for the sustainable production of valuable chemicals and fuels. In this roadmap, we review recent progress in fundamental understanding, catalyst development, and in engineering and scale-up. We discuss the outstanding challenges towards commercialization of electrochemical CO2R technology: energy efficiencies, selectivities, low current densities, and stability. We highlight the opportunities in establishing rigorous standards for benchmarking performance, advances in in operando characterization, the discovery of new materials towards high value products, the investigation of phenomena across multiple-length scales and the application of data science towards doing so. We hope that this collective perspective sparks new research activities that ultimately bring us a step closer towards establishing a low- or zero-emission carbon cycle.
Patrick S Grant et al 2022 J. Phys. Energy 4 042006
Growth in the Li-ion battery market continues to accelerate, driven primarily by the increasing need for economic energy storage for electric vehicles. Electrode manufacture by slurry casting is the first main step in cell production but much of the manufacturing optimisation is based on trial and error, know-how and individual expertise. Advancing manufacturing science that underpins Li-ion battery electrode production is critical to adding to the electrode manufacturing value chain. Overcoming the current barriers in electrode manufacturing requires advances in materials, manufacturing technology, in-line process metrology and data analytics, and can enable improvements in cell performance, quality, safety and process sustainability. In this roadmap we explore the research opportunities to improve each stage of the electrode manufacturing process, from materials synthesis through to electrode calendering. We highlight the role of new process technology, such as dry processing, and advanced electrode design supported through electrode level, physics-based modelling. Progress in data driven models of electrode manufacturing processes is also considered. We conclude there is a growing need for innovations in process metrology to aid fundamental understanding and to enable feedback control, an opportunity for electrode design to reduce trial and error, and an urgent imperative to improve the sustainability of manufacture.
James B Robinson et al 2021 J. Phys. Energy 3 031501
Batteries that extend performance beyond the intrinsic limits of Li-ion batteries are among the most important developments required to continue the revolution promised by electrochemical devices. Of these next-generation batteries, lithium sulfur (Li–S) chemistry is among the most commercially mature, with cells offering a substantial increase in gravimetric energy density, reduced costs and improved safety prospects. However, there remain outstanding issues to advance the commercial prospects of the technology and benefit from the economies of scale felt by Li-ion cells, including improving both the rate performance and longevity of cells. To address these challenges, the Faraday Institution, the UK's independent institute for electrochemical energy storage science and technology, launched the Lithium Sulfur Technology Accelerator (LiSTAR) programme in October 2019. This Roadmap, authored by researchers and partners of the LiSTAR programme, is intended to highlight the outstanding issues that must be addressed and provide an insight into the pathways towards solving them adopted by the LiSTAR consortium. In compiling this Roadmap we hope to aid the development of the wider Li–S research community, providing a guide for academia, industry, government and funding agencies in this important and rapidly developing research space.
Sanjay Sunny et al 2024 J. Phys. Energy 6 022004
Alkali metal anodes are among the most promising candidates for next-generation high-capacity batteries like metal–air, metal–sulphur and all-solid-state metal batteries. The underlying interfacial mechanism of dendrite formation is not yet fully understood, preventing the practical implementation of metal batteries, particularly lithium, despite decades of research. Parallelly, there is an equal significance to the other alkali metal candidates viz sodium and potassium. The major challenges of alkali metal batteries, including dendrite formation, huge volume change, and unstable solid–electrolyte interface, are highlighted. Here, we also present an overview of the recent developments toward improving the anode interfaces. Given the enormous practical potential of alkali metal anodes as next-generation battery electrodes, we discuss some advanced probing techniques that enable a more complete understanding of the complex plating/stripping mechanism. Finally, perspectives and suggestions are provided on the remaining challenges and future directions in alkali metal battery research.
Antonio Politano et al 2024 J. Phys. Energy 6 021502
Water and energy are two strategic drivers of sustainable development, intimately interlaced and vital for a secure future of humanity. Given that water resources are limited, whereas global population and energy demand are exponentially growing, the competitive balance between these resources, referred to as the water-energy nexus, is receiving renewed focus. The desalination industry alleviates water stress by producing freshwater from saline sources, such as seawater, brackish or groundwater. Since the last decade, the market has been dominated by membrane desalination technology, offering significant advantages over thermal processes, such as lower energy demand, easy process control and scale-up, modularity for flexible productivity, and feasibility of synergic integration of different membrane operations. Although seawater reverse osmosis (SWRO) accounts for more than 70% of the global desalination capacity, it is circumscribed by some significant technological limitations, such as: (i) the relatively low water recovery factor (around 50%) due to the negative impact of osmotic and polarization phenomena; (ii) an energy consumption in the range of 3–5 kWh m−3, still far from the theoretical energy demand (1.1 kWh m−3) to produce potable water from seawater (at 50% water recovery factor). Ultimately, desalination is an energy intensive practice and research efforts are oriented toward the development of alternative and more energy-efficient approaches in order to enhance freshwater resources without placing excessive strain on limited energy supplies. Recent years have seen a relevant surge of interest in membrane distillation (MD), a thermally driven membrane desalination technology having the potential to complement SWRO in the logic of Process Intensification and Zero Liquid Discharge paradigm. Due to its peculiar transport mechanism and negligibility of osmotic phenomena, MD allows high-quality distillate production (theoretically, non-volatile species are completely rejected) with a recovery factor of up to 80% at a relatively low operative temperature (typically 60 °C–80 °C). Although low operative temperatures make MD technology attractive for renewable power applications (e.g. solar thermal, wind or geothermal energy sources) or for efficient exploitation of low-grade or waste heat streams, the low energy efficiency intrinsically due to heat losses—and specifically to temperature polarization—has so far hindered the application at industrial scale. Nowadays, photothermal materials able to absorb and convert natural or artificial irradiation into heat have gained great attention, demonstrating the potential to mitigate the 'anthropic' energy input to MD and to mitigate the impact of thermal inefficiencies. On this road, a step-change improvement in light-to-heat conversion is expected through high-throughput computational screening over thermoplasmonic materials based on electronic and optical properties of advanced materials including novel topological phases of matter used as nanofillers in polymeric membranes. Coherently with the concept of Circular Economy, waste hypersaline solutions rejected from desalination process (referred as 'brine') are now the subject of valorization activities along two main exploitation routes: (1) recovery of valuable minor and trace metals and minerals, with special focus on critical raw materials (including, among others, Mg, Na, Ca, K, Sr, Li, Br, B, and Rb); (2) production of salinity gradient power (SGP) renewable energy resulting from the recovery of the Gibbs energy of mixing (mainly represented by the entropic contribution) of two solutions having different ionic concentration. The exciting new frontier of sustainable mining of seawater concentrates is accelerating the appearance of a plethora of innovative membrane materials and methods for brine dehydration and selective extraction of trace ions, although under the sword of Damocles represented by cost feasibility for reliable commercial application. On the other hand, among several emerging technologies, reverse electrodialysis (SGP-RED) was already proven capable—at least at the kW scale–of turning the chemical potential difference between river water, brackish water, and seawater into electrical energy. Efforts to develop a next generation of ion exchange membranes exhibiting high perm-selectivity (especially toward monovalent ions) and low electrical resistance, to improve system engineering and to optimize operational conditions, pursue the goal of enhancing the low power density so far achievable (in the order of a few W per m2). This Roadmap takes the form of a series of short contributions written independently by worldwide experts in the topic. Collectively, such contributions provide a comprehensive picture of the current state of the art in membrane science and technology at the water-energy nexus, and how it is expected to develop in the future. In addition, this Roadmap acknowledges the challenges and advances in membrane systems, particularly emphasizing the interplay of material innovation and system optimization, which collectively contribute to advancing the desalination field within the water-energy nexus framework.
Open all abstracts, in this tab
Chirantan Shee et al 2024 J. Phys. Energy 6 032001
In this current energy crisis era, piezoelectric and triboelectric effects are emerging as promising technologies for energy harvesting. Polyvinylidene fluoride (PVDF) and its copolymers are well-known piezoelectric materials with high piezoelectric coefficients, which are widely used in flexible electronic devices. PVDF is also greatly utilized in the preparation of triboelectric layer due to its higher electronegative nature amongst common polymers. On the other hand, zinc oxide (ZnO) has been widely studied to investigate its multifunctional properties, including piezoelectricity, pyroelectricity and antibacterial activity. This versatile material can be prepared, using low cost and environmentally friendly routes, in various morphologies. Various research has already been performed to capture the synergistic effects of reinforcing ZnO within the PVDF polymeric matrix. This work first describes the basic principles of piezoelectric and triboelectric effects. Thereafter, the piezoelectric and triboelectric performances of PVDF and ZnO-based materials are briefly depicted based on their structures. Finally, the challenges and future scope associated with the mechanical energy harvesting from such materials are highlighted.
Ga-Yeong Kim et al 2024 J. Phys. Energy 6 035002
Quasi-two-dimensional (quasi-2D) perovskites are increasingly explored for integration into light-emitting diodes (LEDs) as light-emissive layers. However, the quasi-2D perovskite films likely exhibit non-uniform dimensional phase distribution and irregular internal crystal structures. These characteristics are known to contribute to undesirable effects, including non-radiative recombination losses and radiative recombination in perovskites of various dimensions, impeding the realization of efficient electroluminescence and high color purity in LEDs. In this study, we present an investigation on the correlation between the dimensional distribution of quasi-2D perovskites and charge carrier behavior by modulating anti-solvent dripping during the film fabrication processes. We provide a comprehensive analysis of the impact of controlled dimensional distribution on charge injection and recombination processes associated with the performance of quasi-2D perovskite LEDs. Our work emphasizes the crucial role played by controlled dimensionality in quasi-2D perovskites in realizing efficient and stable perovskite-based LEDs.
Mohana V Kante et al 2024 J. Phys. Energy 6 035001
Fluorite-type ceria-based ceramics are well established as oxygen ion conductors due to their high conductivity, superseding state-of-the-art electrolytes such as yttria-stabilized zirconia. However, at a specific temperature and oxygen partial pressure they occasionally exhibit electronic conduction attributed to polaron hopping via multivalent cations (e.g. Pr and Ce). (Ce, La, Pr, Sm, Y)O2−δ is a high-entropy oxide with a fluorite-type structure, featuring low concentrations of multivalent cations that could potentially mitigate polaron hopping. However, (Ce, La, Pr, Sm, Y)O2−δ undergoes a structural transition to the bixbyite-type structure above 1000 °C. In this study, we introduce Zr doping into (Ce, La, Pr, Sm, Y)O2−δ to hinder the structural transition at elevated temperatures. Indeed, the fluorite structure at elevated temperatures is stabilized at approximately 10 at.% Zr doping. The total conductivity initially increases with doping, peaking at 5 at.% Zr doping, and subsequently decreases with further doping. Interestingly, electronic conductivity in (Ce, La, Pr, Sm, Y)1−xZrxO2−δ under oxidizing atmospheres is not significant and is lowest at 8 at.% Zr. These results suggest that ceria-based high-entropy oxides can serve as oxygen ion conductors with a significantly reduced electronic contribution. This work paves the way for new compositionally complex electrolytes as well as protective coatings for solid oxide fuel cells.
M Rosa Palacin et al 2024 J. Phys. Energy 6 031501
Battery technologies based in multivalent charge carriers with ideally two or three electrons transferred per ion exchanged between the electrodes have large promises in raw performance numbers, most often expressed as high energy density, and are also ideally based on raw materials that are widely abundant and less expensive. Yet, these are still globally in their infancy, with some concepts (e.g. Mg metal) being more technologically mature. The challenges to address are derived on one side from the highly polarizing nature of multivalent ions when compared to single valent concepts such as Li+ or Na+ present in Li-ion or Na-ion batteries, and on the other, from the difficulties in achieving efficient metal plating/stripping (which remains the holy grail for lithium). Nonetheless, research performed to date has given some fruits and a clearer view of the challenges ahead. These include technological topics (production of thin and ductile metal foil anodes) but also chemical aspects (electrolytes with high conductivity enabling efficient plating/stripping) or high-capacity cathodes with suitable kinetics (better inorganic hosts for intercalation of such highly polarizable multivalent ions). This roadmap provides an extensive review by experts in the different technologies, which exhibit similarities but also striking differences, of the current state of the art in 2023 and the research directions and strategies currently underway to develop multivalent batteries. The aim is to provide an opinion with respect to the current challenges, potential bottlenecks, and also emerging opportunities for their practical deployment.
Sanjay Sunny et al 2024 J. Phys. Energy 6 022004
Alkali metal anodes are among the most promising candidates for next-generation high-capacity batteries like metal–air, metal–sulphur and all-solid-state metal batteries. The underlying interfacial mechanism of dendrite formation is not yet fully understood, preventing the practical implementation of metal batteries, particularly lithium, despite decades of research. Parallelly, there is an equal significance to the other alkali metal candidates viz sodium and potassium. The major challenges of alkali metal batteries, including dendrite formation, huge volume change, and unstable solid–electrolyte interface, are highlighted. Here, we also present an overview of the recent developments toward improving the anode interfaces. Given the enormous practical potential of alkali metal anodes as next-generation battery electrodes, we discuss some advanced probing techniques that enable a more complete understanding of the complex plating/stripping mechanism. Finally, perspectives and suggestions are provided on the remaining challenges and future directions in alkali metal battery research.
Open all abstracts, in this tab
Chirantan Shee et al 2024 J. Phys. Energy 6 032001
In this current energy crisis era, piezoelectric and triboelectric effects are emerging as promising technologies for energy harvesting. Polyvinylidene fluoride (PVDF) and its copolymers are well-known piezoelectric materials with high piezoelectric coefficients, which are widely used in flexible electronic devices. PVDF is also greatly utilized in the preparation of triboelectric layer due to its higher electronegative nature amongst common polymers. On the other hand, zinc oxide (ZnO) has been widely studied to investigate its multifunctional properties, including piezoelectricity, pyroelectricity and antibacterial activity. This versatile material can be prepared, using low cost and environmentally friendly routes, in various morphologies. Various research has already been performed to capture the synergistic effects of reinforcing ZnO within the PVDF polymeric matrix. This work first describes the basic principles of piezoelectric and triboelectric effects. Thereafter, the piezoelectric and triboelectric performances of PVDF and ZnO-based materials are briefly depicted based on their structures. Finally, the challenges and future scope associated with the mechanical energy harvesting from such materials are highlighted.
M Rosa Palacin et al 2024 J. Phys. Energy 6 031501
Battery technologies based in multivalent charge carriers with ideally two or three electrons transferred per ion exchanged between the electrodes have large promises in raw performance numbers, most often expressed as high energy density, and are also ideally based on raw materials that are widely abundant and less expensive. Yet, these are still globally in their infancy, with some concepts (e.g. Mg metal) being more technologically mature. The challenges to address are derived on one side from the highly polarizing nature of multivalent ions when compared to single valent concepts such as Li+ or Na+ present in Li-ion or Na-ion batteries, and on the other, from the difficulties in achieving efficient metal plating/stripping (which remains the holy grail for lithium). Nonetheless, research performed to date has given some fruits and a clearer view of the challenges ahead. These include technological topics (production of thin and ductile metal foil anodes) but also chemical aspects (electrolytes with high conductivity enabling efficient plating/stripping) or high-capacity cathodes with suitable kinetics (better inorganic hosts for intercalation of such highly polarizable multivalent ions). This roadmap provides an extensive review by experts in the different technologies, which exhibit similarities but also striking differences, of the current state of the art in 2023 and the research directions and strategies currently underway to develop multivalent batteries. The aim is to provide an opinion with respect to the current challenges, potential bottlenecks, and also emerging opportunities for their practical deployment.
Sanjay Sunny et al 2024 J. Phys. Energy 6 022004
Alkali metal anodes are among the most promising candidates for next-generation high-capacity batteries like metal–air, metal–sulphur and all-solid-state metal batteries. The underlying interfacial mechanism of dendrite formation is not yet fully understood, preventing the practical implementation of metal batteries, particularly lithium, despite decades of research. Parallelly, there is an equal significance to the other alkali metal candidates viz sodium and potassium. The major challenges of alkali metal batteries, including dendrite formation, huge volume change, and unstable solid–electrolyte interface, are highlighted. Here, we also present an overview of the recent developments toward improving the anode interfaces. Given the enormous practical potential of alkali metal anodes as next-generation battery electrodes, we discuss some advanced probing techniques that enable a more complete understanding of the complex plating/stripping mechanism. Finally, perspectives and suggestions are provided on the remaining challenges and future directions in alkali metal battery research.
Antonio Politano et al 2024 J. Phys. Energy 6 021502
Water and energy are two strategic drivers of sustainable development, intimately interlaced and vital for a secure future of humanity. Given that water resources are limited, whereas global population and energy demand are exponentially growing, the competitive balance between these resources, referred to as the water-energy nexus, is receiving renewed focus. The desalination industry alleviates water stress by producing freshwater from saline sources, such as seawater, brackish or groundwater. Since the last decade, the market has been dominated by membrane desalination technology, offering significant advantages over thermal processes, such as lower energy demand, easy process control and scale-up, modularity for flexible productivity, and feasibility of synergic integration of different membrane operations. Although seawater reverse osmosis (SWRO) accounts for more than 70% of the global desalination capacity, it is circumscribed by some significant technological limitations, such as: (i) the relatively low water recovery factor (around 50%) due to the negative impact of osmotic and polarization phenomena; (ii) an energy consumption in the range of 3–5 kWh m−3, still far from the theoretical energy demand (1.1 kWh m−3) to produce potable water from seawater (at 50% water recovery factor). Ultimately, desalination is an energy intensive practice and research efforts are oriented toward the development of alternative and more energy-efficient approaches in order to enhance freshwater resources without placing excessive strain on limited energy supplies. Recent years have seen a relevant surge of interest in membrane distillation (MD), a thermally driven membrane desalination technology having the potential to complement SWRO in the logic of Process Intensification and Zero Liquid Discharge paradigm. Due to its peculiar transport mechanism and negligibility of osmotic phenomena, MD allows high-quality distillate production (theoretically, non-volatile species are completely rejected) with a recovery factor of up to 80% at a relatively low operative temperature (typically 60 °C–80 °C). Although low operative temperatures make MD technology attractive for renewable power applications (e.g. solar thermal, wind or geothermal energy sources) or for efficient exploitation of low-grade or waste heat streams, the low energy efficiency intrinsically due to heat losses—and specifically to temperature polarization—has so far hindered the application at industrial scale. Nowadays, photothermal materials able to absorb and convert natural or artificial irradiation into heat have gained great attention, demonstrating the potential to mitigate the 'anthropic' energy input to MD and to mitigate the impact of thermal inefficiencies. On this road, a step-change improvement in light-to-heat conversion is expected through high-throughput computational screening over thermoplasmonic materials based on electronic and optical properties of advanced materials including novel topological phases of matter used as nanofillers in polymeric membranes. Coherently with the concept of Circular Economy, waste hypersaline solutions rejected from desalination process (referred as 'brine') are now the subject of valorization activities along two main exploitation routes: (1) recovery of valuable minor and trace metals and minerals, with special focus on critical raw materials (including, among others, Mg, Na, Ca, K, Sr, Li, Br, B, and Rb); (2) production of salinity gradient power (SGP) renewable energy resulting from the recovery of the Gibbs energy of mixing (mainly represented by the entropic contribution) of two solutions having different ionic concentration. The exciting new frontier of sustainable mining of seawater concentrates is accelerating the appearance of a plethora of innovative membrane materials and methods for brine dehydration and selective extraction of trace ions, although under the sword of Damocles represented by cost feasibility for reliable commercial application. On the other hand, among several emerging technologies, reverse electrodialysis (SGP-RED) was already proven capable—at least at the kW scale–of turning the chemical potential difference between river water, brackish water, and seawater into electrical energy. Efforts to develop a next generation of ion exchange membranes exhibiting high perm-selectivity (especially toward monovalent ions) and low electrical resistance, to improve system engineering and to optimize operational conditions, pursue the goal of enhancing the low power density so far achievable (in the order of a few W per m2). This Roadmap takes the form of a series of short contributions written independently by worldwide experts in the topic. Collectively, such contributions provide a comprehensive picture of the current state of the art in membrane science and technology at the water-energy nexus, and how it is expected to develop in the future. In addition, this Roadmap acknowledges the challenges and advances in membrane systems, particularly emphasizing the interplay of material innovation and system optimization, which collectively contribute to advancing the desalination field within the water-energy nexus framework.
S E Yang et al 2024 J. Phys. Energy 6 022003
With growing concerns about the depletion of fossil fuels and climate change, there is an urgent global demand for the development of sustainable and renewable energy sources. The thermoelectric technology, which converts waste heat into electricity, presents a unique opportunity to ensure a sustainable electric supply and enhance energy efficiency without incurring additional costs. Recently, the utilization of three-dimensional (3D) printing technology for fabricating thermoelectric materials has attracted tremendous interest because of the simplicity of design of power generators and the potential for economical manufacturing. This study focuses on research related to Bi2Te3 thermoelectric materials produced using 3D printing, and it highlights the fundamental principles, advantages, challenges, and recent remarkable advancements associated with this manufacturing approach. Furthermore, we explored various device applications, including shape-conformable wearable, and micro devices with printed thermoelectric materials. Finally, we discuss the promising research directions and prospects for industrialization in 3D-printed thermoelectric materials.
Open all abstracts, in this tab
Labbe et al
The air electrode of a Zn-air battery facilitates the O2 reduction and evolution reactions during battery discharge and charge, respectively. These reactions are kinetically sluggish and appropriate catalysts are essential at the air electrode to increase battery efficiency. Precious metals are traditionally used, but increasingly attention has shifted towards non-precious metal catalysts to decrease the cost and increase the practicality of Zn-air batteries. However, loading of the catalyst onto the air electrode is equally as important as catalyst selection. Several methods can be used to deposit catalysts, each with their own advantages and disadvantages. Example methods include spray-coating, electrodeposition, and impregnation. These can be categorized as indirect, direct, and hybrid catalyst loading techniques, respectively. Direct and hybrid loading methods generally provide better depth of loading than indirect methods, which is an important consideration for the porous, air-breathing electrode of a Zn-air battery. Furthermore, direct methods are free from ancillary materials such as a binder, required by indirect and hybrid methods, which translates into better cycling stability. This review examines the various techniques for fabricating catalyst-enhanced air electrodes with an emphasis on their contributions to battery performance and durability. More durable Zn-air battery air electrodes directly translate to longer operational lifetimes for practical Zn-air batteries, which is an important consideration for the future implementation of electrochemical energy storage in energy systems and technologies. Generally, direct catalyst loading techniques, which integrate catalyst material directly onto the air electrode structure, provide superior cycling performance to indirect catalyst loading techniques, which distribute an ex-situ synthesized material onto the top layer of the air electrode. Hybrid catalyst loading techniques, which grow catalyst material directly onto nanostructured supports and then integrate them throughout the air electrode architecture, offer a compromise between direct and indirect methods.